MIETTA EVO

Evolution Line
Pellet

Airtight, ventilated pellet stove

3.4-9.0 kW
Nominal thermal power

258 m³
m³ heatable

Evolution Line
Pellet

Airtight, ventilated pellet stove

Completely sealed for maximum safety and equipped with a self-cleaning brazier and pellet loading motor that simplify daily management of the stove.

Characteristics

Product advantages

Upper room on/off ventilation with dedicated motor
Ceramic glow plug for quick ignition
Self-cleaning brazier with Brushless motor
Brushless gear motor for pellet loading
Shell and tube heat exchanger
Smoke discharge outlet option: rear
Combustion chamber probe
Cast iron door, hearth and brazier
Extractable ash drawer
Power can also be selected within individual chrono bands
Emergency module

Glass cleaning system
A system of pre-heated air which removes any deposit from the fire-door glass.
Air-tight seal test at 50 Pa (100% of the products)
All the air-tight products, or even those that have some “air-tight” components (like the hopper), are tested under high pressure at the end of the production line to ensure their safety and optimal performance.
Flue pipe safety pressure switch
Checks the correct evacuation of the fumes and, in case of need, locks the loading of pellets, to avoid problems on the generator.
Doors in cast iron
The high-quality cast-iron doors are made to last and ensure perfect sealing at all times.
Outdoor temperature thermostat input
The product interfaces with room temperature control devices (thermostat or contacts) to achieve the selected temperature in every room.
Clean combustion
Increases the combustion efficency and the duration of parts subject to wear duration reducing at the same time the ordinary brazier cleaning.
Room temp. thermostat
The room probe optimizes comfort and lowers noticeably the consumption.
Chrono-thermostat
Chronothermostat provided with temperature control divided in four daily slots for an optimal rooms management.
Auto-adjustment of the fumes extractor (encoder)
It keeps the RPM of the fumes motor constant, to ensure correct combustion of the product.
Hopper safety thermostat
Ensure always high safety standard, preventing the overheting of the product in case of anomaly.
Auto-relighting after black-out
Following a black out the appliance automatically re-starts after having carried out the scheduled auto-control.
1st and 2nd air auto-balancing
Primary and secondary air electronically balanced for an optimal combustion and thermal efficency.

MIETTA EVO

Available versions

The soul of fire and warmth

Technical data

Technical specifications

Dimensions (WxHxD)496x1073x579 mm
Hourly consumption0.8 - 2 kg/h
Total tank capacity~ 20 kg
Fumes outlet diameter (Ø)80 mm B
Efficiency93.9 - 93.1 %
Net Weight157 kg
Energy Class
Nominal thermal power3.4 - 9 kW
Heatable m³258 m³ (*)

(*) - The data is indicative and refers to the need of 30 kcal/h x m³.

Download the support material

Aria Pulita

pdf418 kB

Declaration of Performance

pdf2 MB

Energy labelling - Labelling

Declaration of conformity

pdf183 kB

Energy labelling - product sheet

pdf150 kB

Ecodesign

pdf169 kB

Certifications

CE
The CE marking indicates conformity with EU standards, enabling the free marketing of marked products within the European market.
Ecodesign
European certification defining the ecodesign guidelines for biomass products.
Conto Termico 2.0
Only for Italy: the Ministerial Decree 28/12/12, better known as “Conto Termino”, allows a specific incentive in case of replacement of old appliances by new ones with certain characteristics
Flamme Verte
French trademark of the ADEME agency for the environmement and the energy. The products “Flamme Verte” approved guarantee the best high energy performances and respect for the environment.
DTA
Certification issued by the French Scientific and Technical Building Centre – CSTB – for watertight devices tested in watertight installation conditions.
BlmSchV
German regulations on controlling emissions.
MFB
Only for Germany: The products is ready to be connected to a multiply chimney connection , just when the installation is made in accordance with requirements of the regional and national standards, and when observed the norms DIN EN 13384-2, DIN V 1816-1, DIN 18896 and MFeuV-2007 (Muster- Feuerungsverordnung), and that the district chimney sweeper has checked and approved the correct installation.