- Pellet stoves

Traditional Line
Pellet

4.3-14.5 kW
Nominal thermal power

416 m³
m³ heatable

Traditional Line
Pellet

Characteristics

Product advantages

Thick steel combustion chamber
Cast iron door and brazier
Side shell and tube heat exchanger (manual cleaning)
Removable ash compartment
Without ventilation
Ceramic glow plug for quick ignition
PWM-controlled circulator
Combustion chamber probe
Thermal and water pressure relief valves
Safety valve 3 bar
Expansion tank
Vent
Pressure transducer with display
Reduced depth
Single door with double glazing (both ceramic)
Smoke discharge outlet option: rear, upper, right-hand side

Glass cleaning system
A system of pre-heated air which removes any deposit from the fire-door glass.
Removable brazier for easy cleaning
The burn pot’s system of construction allows easy extraction for quick and complete cleaning.
Auto-adjustment of the fumes extractor (encoder)
It keeps the RPM of the fumes motor constant, to ensure correct combustion of the product.
Hopper safety thermostat
Ensure always high safety standard, preventing the overheting of the product in case of anomaly.
1st and 2nd air auto-balancing
Primary and secondary air electronically balanced for an optimal combustion and thermal efficency.
Outdoor temperature thermostat input
The product interfaces with room temperature control devices (thermostat or contacts) to achieve the selected temperature in every room.
Air-tight seal test at 50 Pa (100% of the products)
All the air-tight products, or even those that have some “air-tight” components (like the hopper), are tested under high pressure at the end of the production line to ensure their safety and optimal performance.
Flue pipe safety pressure switch
Checks the correct evacuation of the fumes and, in case of need, locks the loading of pellets, to avoid problems on the generator.
Chrono-thermostat
Chronothermostat provided with temperature control divided in four daily slots for an optimal rooms management.
Auto-relighting after black-out
Following a black out the appliance automatically re-starts after having carried out the scheduled auto-control.
Clean combustion
Increases the combustion efficency and the duration of parts subject to wear duration reducing at the same time the ordinary brazier cleaning.
Doors in cast iron
The high-quality cast-iron doors are made to last and ensure perfect sealing at all times.

Finishes

The essence of elegance and timeless design

Technical data

Technical specifications

Dimensions (WxHxD)793x1105x384 mm
Hourly consumption0.9 - 3.2 kg/h
Total tank capacity~ 22 kg
Fumes outlet diameter (Ø)100 mm P/S/LAT.DX
Efficiency95 - 93 %
Net Weight151 kg
Energy ClassA+
Nominal thermal power4.3 - 14.5 kW
Heatable m³416 m³ (*)

(*) - The data is indicative and refers to the need of 30 kcal/h x m³.

Download the support material

Declaration of Performance

pdf3 MB

Energy labelling - Labelling

Declaration of conformity

pdf287 kB

Energy labelling - product sheet

pdf291 kB

Ecodesign

pdf286 kB

Certifications

CE
The CE marking indicates conformity with EU standards, enabling the free marketing of marked products within the European market.
Ecodesign
European certification defining the ecodesign guidelines for biomass products.
Conto Termico 2.0
Only for Italy: the Ministerial Decree 28/12/12, better known as “Conto Termino”, allows a specific incentive in case of replacement of old appliances by new ones with certain characteristics