MARILENA PLUS AD

Traditional Line
Pellet

Traditional Line
Pellet

Characteristics

Product advantages

Cast iron door, hearth and brazier
Shell and tube heat exchanger
Airtight tank
Removable ash compartment
Top room ventilation with dedicated motor and Pro Air Setup function
Ducting with dedicated motor up to 8 metres, thermostatically controlled and removable + AIR ZONE CONTROL
Exit options for ducting (Ø80 mm): rear, left side
Reduced depth
Single door with double glazing (both ceramic)
Detachable handle with dedicated housing
Smoke discharge outlet option: rear, upper, left-hand side
The hearth can be removed by authorised service personnel

Glass cleaning system
A system of pre-heated air which removes any deposit from the fire-door glass.
Removable brazier for easy cleaning
The burn pot’s system of construction allows easy extraction for quick and complete cleaning.
Auto-adjustment of the fumes extractor (encoder)
It keeps the RPM of the fumes motor constant, to ensure correct combustion of the product.
Hopper safety thermostat
Ensure always high safety standard, preventing the overheting of the product in case of anomaly.
1st and 2nd air auto-balancing
Primary and secondary air electronically balanced for an optimal combustion and thermal efficency.
Outdoor temperature thermostat input
The product interfaces with room temperature control devices (thermostat or contacts) to achieve the selected temperature in every room.
Air-tight seal test at 50 Pa (100% of the products)
All the air-tight products, or even those that have some “air-tight” components (like the hopper), are tested under high pressure at the end of the production line to ensure their safety and optimal performance.
Flue pipe safety pressure switch
Checks the correct evacuation of the fumes and, in case of need, locks the loading of pellets, to avoid problems on the generator.
Chrono-thermostat
Chronothermostat provided with temperature control divided in four daily slots for an optimal rooms management.
Auto-relighting after black-out
Following a black out the appliance automatically re-starts after having carried out the scheduled auto-control.
Room temp. thermostat
The room probe optimizes comfort and lowers noticeably the consumption.
Clean combustion
Increases the combustion efficency and the duration of parts subject to wear duration reducing at the same time the ordinary brazier cleaning.
Doors in cast iron
The high-quality cast-iron doors are made to last and ensure perfect sealing at all times.

MARILENA PLUS AD

Finishes

The essence of elegance and timeless design

Technical data

Technical specifications

Energy ClassA+

(*) - The data is indicative and refers to the need of 30 kcal/h x m³.

Download the support material

Declaration of Performance

pdf620 kB

Energy labelling - Labelling

pdf227 kB

Data sheet

pdf350 kB

Declaration of conformity

pdf844 kB

Energy labelling - product sheet

pdf939 kB

Ecodesign

pdf474 kB

Certifications

CE
The CE marking indicates conformity with EU standards, enabling the free marketing of marked products within the European market.
Ecodesign
European certification defining the ecodesign guidelines for biomass products.
Conto Termico 2.0
Only for Italy: the Ministerial Decree 28/12/12, better known as “Conto Termino”, allows a specific incentive in case of replacement of old appliances by new ones with certain characteristics
Flamme Verte
French trademark of the ADEME agency for the environmement and the energy. The products “Flamme Verte” approved guarantee the best high energy performances and respect for the environment.
BlmSchV
German regulations on controlling emissions.
MFB
Only for Germany: The products is ready to be connected to a multiply chimney connection , just when the installation is made in accordance with requirements of the regional and national standards, and when observed the norms DIN EN 13384-2, DIN V 1816-1, DIN 18896 and MFeuV-2007 (Muster- Feuerungsverordnung), and that the district chimney sweeper has checked and approved the correct installation.