COMFORT P70 PLUS 5.0

Traditional Line
Pellet

Ducted pellet insert

3.4-10.0 kW
Nominal thermal power

287 m³
m³ heatable

Traditional Line
Pellet

Ducted pellet insert

It offers the possibility of ducting air up to 8 metres, optimising the 10 kW nominal power to heat even adjacent rooms. The ducting can be switched off and regulated automatically via a room thermostat, ensuring constant temperatures, reduced consumption and optimised performance.

The charm of the fireplace with the convenience of pellets

Characteristics

Product advantages

Cast iron door, hearth and brazier
Shell and tube heat exchanger
Ash compartment
Ventilation with PRO AIR SETUP
Room temperature control with AUTOMATIC function
Pellet level sensor
Smoke discharge outlet option: upper
Ducting with dedicated motor up to 8 metres, thermostatically controlled and removable + AIR ZONE CONTROL
Ducting outlet options (Ø80 mm): rear
Simplified system for insert removal
Lifting handles for easy handling
Easy Setup
Easy Control
Ceramic glow plug
FPC Plus function
Radio remote control with "handheld device", with thermostat function

Glass cleaning system
A system of pre-heated air which removes any deposit from the fire-door glass.
Removable brazier for easy cleaning
The burn pot’s system of construction allows easy extraction for quick and complete cleaning.
Auto-adjustment of the fumes extractor (encoder)
It keeps the RPM of the fumes motor constant, to ensure correct combustion of the product.
Hopper safety thermostat
Ensure always high safety standard, preventing the overheting of the product in case of anomaly.
1st and 2nd air auto-balancing
Primary and secondary air electronically balanced for an optimal combustion and thermal efficency.
Outdoor temperature thermostat input
The product interfaces with room temperature control devices (thermostat or contacts) to achieve the selected temperature in every room.
Flue pipe safety pressure switch
Checks the correct evacuation of the fumes and, in case of need, locks the loading of pellets, to avoid problems on the generator.
Chrono-thermostat
Chronothermostat provided with temperature control divided in four daily slots for an optimal rooms management.
Auto-relighting after black-out
Following a black out the appliance automatically re-starts after having carried out the scheduled auto-control.
Room temp. thermostat
The room probe optimizes comfort and lowers noticeably the consumption.
Clean combustion
Increases the combustion efficency and the duration of parts subject to wear duration reducing at the same time the ordinary brazier cleaning.
Doors in cast iron
The high-quality cast-iron doors are made to last and ensure perfect sealing at all times.

Technical data

Technical specifications

Dimensions (WxHxD)678.5x530x565 mm
Hourly consumption0.7 - 2.2 kg/h
Total tank capacity13 kg
Fumes outlet diameter (Ø)80 mm SUP
Efficiency93.8 - 91.3 %
Net Weight131 kg
Energy ClassA+
Nominal thermal power3.4 - 10 kW
Heatable m³287 m³ (*)

(*) - The data is indicative and refers to the need of 30 kcal/h x m³.

Download the support material

Declaration of Performance

pdf361 kB

Energy labelling - Labelling

Declaration of conformity

pdf284 kB

Energy labelling - product sheet

pdf290 kB

Ecodesign

pdf284 kB

Certifications

CE
The CE marking indicates conformity with EU standards, enabling the free marketing of marked products within the European market.
Ecodesign
European certification defining the ecodesign guidelines for biomass products.
Conto Termico 2.0
Only for Italy: the Ministerial Decree 28/12/12, better known as “Conto Termino”, allows a specific incentive in case of replacement of old appliances by new ones with certain characteristics
Flamme Verte
French trademark of the ADEME agency for the environmement and the energy. The products “Flamme Verte” approved guarantee the best high energy performances and respect for the environment.
BlmSchV
German regulations on controlling emissions.
MFB
Only for Germany: The products is ready to be connected to a multiply chimney connection , just when the installation is made in accordance with requirements of the regional and national standards, and when observed the norms DIN EN 13384-2, DIN V 1816-1, DIN 18896 and MFeuV-2007 (Muster- Feuerungsverordnung), and that the district chimney sweeper has checked and approved the correct installation.